 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 47 Watts LCT43-E Series Total Power: 47 Watts Input Voltage: 85-264 VAC 120-300 VDC # of Outputs: Triple Electrical Specs Input Input range Frequency Inrush current Input current Efficiency EMI filter 85-264 VAC 120-300 VDC 47-63 Hz <20 A peak @ 115 VAC; <40 A peak @ 230 VAC, cold start @ 25C 1 A max. (RMS) @ 115 VAC 70% typical at full load FCC Class B conducted and radiated CISPR 22 Class B conducted and radiated EN55022 Class B conducted and radiated Bellcore GR-1089-core Class B conducted <3.5 mA @ 50/60 Hz, 264 VAC input Special Features * * * * * * * Totally enclosed Universal input Quick Installation Built-in EMI filter Low output ripple Overvoltage protection Overload protection Safety ground leakage current Output Maximum power Cross regulation Hold-up time Overload protection 47 W with 12 CFM forced air 2% on output 1; 5% on outputs 2, 3 10 ms @ 47 W load, 100 VAC input Short circuit protection on all outputs. Case overload protected @ 110135% above peak rating 5.50-6.75 VDC on main output Environmental Operating temperature: 0 to 50C ambient; derate each output at 2.5% per degree from 50 to 70C Electromagnetic susceptibility: designed to meet IEC 1000-4, -2, -3, -4, -5, -6, 8, 11 Level 3 Humidity: Operating; non-condensing 5% to 90% Vibration: .41 G from 3 to 500 Hz Spectral break points of .0065 G2/Hz at 10 Hz and 200 Hz and 5 db/octave roll off at each end, 2 hours per axis Storage temperature: -40 to 85C Temperature coefficient: .04% per C MTBF demonstrated: >300,000 hrs @ full load and 25C ambient conditions VDE UL CSA CB CE Overvoltage protection Safety 0805/EN60950 (IEC950) UL1950 CSA 22.2-234 -950-95-M90 Certificate and report Mark (LVD) 21310-3336-0003 E186249 6593 rev 8.11.04 90 Technical Support: (888) 41-ASTEC or (407) 241-2752 Americas: (760) 930-4600 Europe (UK) 44 (1384) 842-211 Asia (HK) 852-2437-9662 AMERICAS 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 EUROPE Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44(1384) 843-355 ASIA Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 LCT43-E Series Ordering Information Model Number LCT43-E Output Voltage +5 V +12 V -12 V Minimum Load 1.0 A 0.1 A 0A Maximum Load with Convection Cooling 4A 1A 0.5 A Maximum Load with 12 CFM Forced Air 7A 1.2 A 0.5 A Peak Load1 8A 1.5 A 0.6 A Regulation2 Ripple P/P (PARD)3 50 mV 120 mV 120 mV +4 / -2% 5% 5% 1. 2. 3. 4. Peak current lasting <30 seconds with a maximum 10% duty cycle. At 25C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. Peak-to-peak with 20 MHz bandwidth and 10 F in parallel with a 0.1 F capacitor at rated line voltage and load ranges. Minimum Loads are required. Pin Assignments Connector SK1-1 SK1-2 SK1-3 SK2-1 SK2-2 SK2-3 SK2-4 SK2-5 SK2-6 Mating Connectors AC Input: IEC 320 DC Outputs: Molex 15-48-0406 (USA) LCT43-E AC Line Ground AC Neutral -12 V Com +5 V +5 V Com +12 V Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is .02". 3. Specifications are for convection rating at factory settings at 115 VAC input, 25C unless otherwise stated. 4. Warranty: 1 year 5. Weight: 1.25 lb. / 0.57 kg www.astecpower.com 91 |
Price & Availability of LCT43-E
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |